Linebird’s Flying Robotic Tools Make Power Line Maintenance Safer

A drone carries LineBird’s Osprey Nonconductive Payload System near power lines. Linebird’s specialized tools assist infrastructure asset owners and keep operators on the ground.

Lee Corbin remembers the requests that could turn the end of a long workday into its most dangerous moment: “I need one more thing.” For a tired lineworker who has already climbed down, that means going back up. Fatigue and pressure can invite mistakes. Corbin, Linebird’s chief operating officer and a former transmission and helicopter lineman, aims to change that equation by putting certain tasks into the hands of a drone pilot (who may also be a lineman) instead.

On a recent episode of the Dawn of Autonomy podcast, Corbin explained how Linebird combines drones with specialized tools to measure electrical connections, support storm restoration and maintain power infrastructure. The objective goes beyond collecting images. Linebird wants to move the working tool to the infrastructure without sending a person up for every task. “Every one of our tools that goes up is another line worker that can go home safely,” Corbin said.

From Helicopter Linework to Drone-Powered Utility Maintenance

Corbin brings experience across field operations, business ownership, technology strategy and management. Before joining Linebird, he directed aviation and underground utilities for a large civil construction company.

His linework background gives him a practical understanding of what access demands. Crews build and maintain infrastructure across mountains, swamps and river crossings. A seemingly straightforward measurement can require a bucket truck, temporary access mats or an expensive helicopter carrying a worker in close proximity of an energized line.

Corbin described helicopter linework, in particular, as an unforgiving combination of aviation precision and electrical hazards. The pilot must hold position while the worker performs maintenance near or on energized infrastructure. “You have to follow the procedures letter for letter,” he said, or risk injury or death.

That experience shapes Linebird’s purpose. Corbin does not view drones as replacements for lineworkers. He sees them as another way for skilled people to perform specific tasks, including workers whose bodies can no longer sustain years of climbing. “Being a lineman, the last thing I ever looked to do was replace a lineman’s job,” he said. “So this gave me the ability to help linemen extend their careers.”

Linebird’s Origin: Putting a Lineworking Tool Under a Drone

The company’s beginnings trace to a utility manager’s request. A college student, Michael Beiro, needed help developing a way to suspend an electrical resistance measurement tool from a drone and use it on live power lines. Corbin initially treated the project as a favor. Within two and a half hours of their first meeting, the pair had drawn a prototype on a whiteboard.

“I’m thinking I’m just gonna help a kid graduate college,” Corbin recalled. About six months later, Beiro returned with news that he had started a company. Corbin consulted, before eventually joining the business full time.

The original question still guides the company’s development. Can a drone deliver a useful tool to the work location and help a crew complete the task? Linebird’s answer centers on its Osprey Nonconductive Payload System (NPS), a modular platform for carrying interchangeable tools. Corbin compared the approach to a bit of a screwdriver: one supporting system, multiple working ends. “We are a full research and development house, so we like to make things that don’t exist,” he explained.

How Osprey NPS Supports Drone-Based Power Line Inspections

 A drone carries LineBird’s Osprey NPS and an electrical resistance measurement tool. The complete payload enables crews to assess power line connections remotely.

Osprey is not a drone. It connects an aircraft to the tool that performs the work. Corbin described a configuration combining an “off the shelf” FAA Part 107 Heavy lifter drone, Osprey NPS and a SensorLink resistance measurement tool modified for flight. That complete payload weighs about 18 pounds, he said.

The measurement application brings an established lineworking instrument to electrical connection points. Instead of positioning a worker with a hot stick, bucket truck or helicopter, the drone carries the instrument to the connector. Corbin explained that resistance creates heat and that utilities use resistance measurements to assess connections. They also collect resistance and amperage readings for assessment. One of the biggest issues in those collections involves the logistics of moving heavy equipment into difficult terrain. In contrast, deploying a drone from a small utility vehicle or boat can reduce the need for temporary access infrastructure and subsequent vegetation restoration.

Osprey’s modular construction also lets operators adjust the distance between aircraft and tool. Corbin said the system can extend from roughly two feet to 30 feet, depending on the application and electrical environment.

A compatible payload-release mechanism gives the operator another option during a safety incident. Crews can also place the tool on an elongated landing pad, release it and land the aircraft separately.

Beyond Inspection: Drone Tools for Storm Restoration and Maintenance

Linebird’s broader lineup of various “end-effectors” addresses physical work as well as measurements. Corbin described a wire cutter developed in response to an East Coast utility’s concerns about storm-restoration times. Linebird worked with Greenlee and Emerson to adapt an existing hydraulic remote cutter for flight. He outlined the workflow. A service worker could use the drone-carried cutter to separate a damaged section, helping crews restore service to customers upstream of that location. A rapid-deployment line-pulling kit could then place pulling line (“Mule Tape”) ahead of the arriving line crew. The point is not to eliminate the crew’s work. It is to prepare the site and shift appropriate tasks so lineworkers can concentrate on the activities that still require their hands and expertise.

LineBird’s approach to utility work with drones emphasizes slow, steady and precise flying, supported by training in the payload, tools and operating procedures.

Preventive maintenance presents another opportunity. Corbin described horizontal and vertical spraying systems that allow crews to clean and lubricate switches from different approaches. “The power line is a machine,” he said. “It has moving parts.” Corrosion, frost and accumulated material can make switches harder to operate. Reaching remote equipment with a drone offers another way to perform that maintenance without first establishing access for heavy vehicles.

Electromagnetic Interference Remains a Critical Engineering Challenge

Carrying a tool is only part of the problem. The aircraft must remain reliable near energized infrastructure. Corbin said electromagnetic interference (EMI) can disrupt communications, magnetic heading and flight stability. 

Linebird’s first National Science Foundation (NSF) grant supported development of a stability system intended to help protect aircraft operating in that environment.The company has moved into a second grant phase focused on commercialization, he said. Its patent-pending system remains a development priority, with refinement and market delivery ahead rather than a finished capability available universally today.

Linebird also works with aircraft manufacturers instead of building its own drones. Corbin said the company was collaborating with five heavy-lift drone companies as they developed their next-generation platforms. “We wanted just to be another tool in the toolbox for everybody to use, but never replace anybody else’s tools,” he said.

Utility Drone Training Puts Precision Before Speed

 LineBird’s drone-mounted sprayer helps crews clean and lubricate power line switches. It provides another way to maintain equipment in hard-to-reach locations.

Corbin drew a clear distinction between inspection flying and physical interaction with infrastructure. “Our system is exactly backwards,” he said of the habits of fast, efficient inspection pilots. “Ours is about being slow and steady and smooth.”

Methodical movement matters when the payload must make controlled contact. Piloting skill alone does not qualify a crew. Operators must understand the tool, payload, utility task, coordination requirements and operating limits. Linebird provides training on their system to get pilots up to speed (no pun intended).

Corbin also cautioned against confusing these operations with full autonomy. He emphasized the importance of human judgment and retaining a safety layer for both people and infrastructure.

New Year, Big Projects

As Linebird looks toward 2027, its priorities include aircraft stability, additional tools and collaboration with utilities, manufacturers, universities and labor representatives. Corbin acknowledged that adoption still includes research and evaluation, even as deployment grows. For him, progress comes back to a practical question: Which task can the next tool take off a lineworker’s body without taking that worker’s expertise out of the job? “Now you can actually give that aging line worker a skill set to where they can continue to do live-line application,” he said, “but without having to put the wear and tear on their bodies.”

Watch Lee Corbin on the Dawn of Autonomy here.

Learn more about Linebird here.

All images courtesy of Linebird.